![background image](http://html1.mh-extra.com/html/barco/rhdm-2301/rhdm-2301_user-manual_3809077032.webp)
32 _____________________________________________________Barco - RHDM-2301 - User manual
How to
3.11 How to show two input signals next to each other
• Press (
)
Figure 17: View mode functionality
The inputs selected for window 1 and window 2 are shown together on the screen. When
the display is showing the inputs in Pan&Zoom or dual view mode, the input settings can
still be changed by pressing
or
to activate the respective window and/or cycle
through the available inputs for that window. The changes will be shown instantaneously.
In the
Pan&Zoom mode
the two inputs are shown in full format (cropped) on the
screen. In this mode it is possible to pan the image and to zoom in on the image. These
functions can be performed for window 1 and window 2 separately.
To change the relative size of the two parts of the screen in the Pan&Zoom mode:
• Move with the pointer to the separating line in the middle of the screen using the
trackball
• When the double arrow appears while hovering with the pointer above the separat-
ing line, press
(continuously) and drag the separating line to the left or the right
using the trackball
• Release
to leave the separating line at the obtained position
In the
dual view mode
, the two inputs are scaled to fit the new window size. The aspect
ratio remains unchanged while up- or downscaling.
pointer
double arrow
SINGLE INPUT
WINDOW 1 WINDOW 2
WINDOW 1 WINDOW 2
DUAL VIEW
PAN&ZOOM