Barco RETRO GRAPHICS 2100, Руководство по установке

Страница: 17 / 17

4-2 5975978 RETRO GRAPHICS 2100 220198
Enabling/Disabling the Password
 b. When the password strap plug is inserted into the left pin and
the middle pin the password function is disabled .
 a. When the password strap is inserted into the right pin and the
middle pin the password function is enabled .
Note : When rotating the projector back to its operational (in the lower
cabinet) position you should hear a spring loaded
'click'
as the
projector brackets engage with the slide rail in the correct position.
It will now be correctly positioned for the bracket locking screws to
be tightened at both sides of the projector.
Ž The strap plug can be seen approximately half way down on the
left side of the circuit board. To change its position just unplug by
pulling it out of its pins. The choice of password function is a user
definable decision !
How to Change the Password Menu
It is required to enter into the Service mode (refer to the Owners
manual for exact procedural steps.)
First enter into the Adjustment Mode. Then press the control disc
forwards or backward (on the RCU) to highlight Service and then
press ENTER .
Some items in the Service mode are password protected (when the
password function is active.) Enter your password to continue. All
other password protected items are now also freely available if you
enter into the adjustment mode.
ENTER displays the Change Password menu
EXIT returns to the adjustment selection menu.
The old password is displayed and can be changed by entering the
digit with the numeric keys of the RCU or local keypath.
Press ENTER to save the new entered password.
Press EXIT if no changes have to be made.
Highlight Change password by pressing the control disc up or down
and then press ENTER to display the Change Password menu.
Once the password strap plug position has been chosen it is
necessary to secure the projector. Follow the instructions in reverse
order to reassemble the projector.
PASSWORD
STRAP
PLUG-ENABLE
PASSWORD
STRAP
PLUG-DISABLE

a

b
PASSWORD
STRAP
PLUG
CONTROLLER
CIRCUIT BOARD
MODULE
Ž
Select with or
then <ENTER>
<EXIT> to return.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUN TIME
LAMP RUN TIME HISTORY
MORE....
CHANGE PASSWORD
Enter new password
0000
Select with or
then <ENTER>
<EXIT> to return.