Barco RETRO GRAPHICS 2100, Руководство по установке

Страница: 12 / 17

3-5
5975978 RETRO GRAPHICS 2100 220198
Power Up Considerations
Changing the Projector Input voltage
Place the projector on a stable solid surface in preparation for altering
its mains voltage.
 Remove the leftside (when facing the lens) fixing bracket of
the projector by unscrewing its two fixing bolts.
Remove the top cover by loosening or undoing its fixing screws as
indicated above. Then slide the cover backwards slightly and lift off,
the internal structure will be now visible.
ΠAll the fixing screws for the top cover are indicated and are
required to be removed or loosened in step  .
‘ The projector can be removed from the rear (rear slide out
position) by pulling and gripping firmly until it is fully out. Gently place
the projector on a solid stable surface.
Warning: Projector is heavy .
’ The projector can be removed from the front (front slide out
position) by pulling and gripping firmly until it is fully out. Gently place
the projector on a solid stable surface.
Warning: Projector is heavy .
‘
PROJECTOR
REMOVAL POSITION
FROM REAR
ê
PROJECTOR
REMOVAL POSITION
FROM FRONT
ê
’
Œ
PROJECTOR
TOP COVER
SCREWS
PROJECTOR
TOP
COVER
PROJECTOR
FIXING
BRACKET
PROJECTOR
FIXING BRACKET
SCREWS
PROJECTOR
TOP
COVER
