![background image](http://html1.mh-extra.com/html/barco/r9827880/r9827880_owners-manual_4048272050.webp)
R5975765 RCVDS05 020997
50
R5975765 RCVDS05 020997
50
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Second example : RCVDS05 equiped with the same modules as in example one, but
the module in slot 4 is removed.
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
TO PROJECTOR
9 8 2 80 20
9 8 27 91 0
9 8 27 91 0
9 8 279 00
9 8 279 10
The RCVDS05 will count its source numbers as follow :
source number
source
slot
1
RGB analog
1
2
S-Video
2
3
Video
2
4
RGB analog
3
5
Empty slot
4
6
RGB analog
5
By pulling out the Video/S-Video input module, the RGB analog source on slot number
5 (example one) gets a new source number (source 6) (a Video/S-Video input module
occupies two source numbers). When selecting this new source 6, a new adjustment
block will be created by the projector.
1
2
3
4
5
6
7
8
9
10
slot
number
C.2. Multiple RCVDS05's.
The source number counting starts with slot 1 of the first RCVDS05. It counts all
source input slots of the first RCVDS until it finds the expansion module. The counting
will be continued with slot 1 of the next RCVDS05.
Note : the expansion module must always be located after the occupied input slots.
Never insert an expansion module between two inputs, otherwise an error will be
displayed (see chapter "Error codes").
If there are free slots between the last occupied slot and the expansion module, these
slots will be taken into account to calculate the source numbers.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Second example : RCVDS05 equiped with the same modules as in example one, but
the module in slot 4 is removed.
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
TO PROJECTOR
9 8 280 20
9 8 2 79 10
9 8 2 79 10
9 8 2 79 00
9 8 2 79 10
The RCVDS05 will count its source numbers as follow :
source number
source
slot
1
RGB analog
1
2
S-Video
2
3
Video
2
4
RGB analog
3
5
Empty slot
4
6
RGB analog
5
By pulling out the Video/S-Video input module, the RGB analog source on slot number
5 (example one) gets a new source number (source 6) (a Video/S-Video input module
occupies two source numbers). When selecting this new source 6, a new adjustment
block will be created by the projector.
1
2
3
4
5
6
7
8
9
10
slot
number
C.2. Multiple RCVDS05's.
The source number counting starts with slot 1 of the first RCVDS05. It counts all
source input slots of the first RCVDS until it finds the expansion module. The counting
will be continued with slot 1 of the next RCVDS05.
Note : the expansion module must always be located after the occupied input slots.
Never insert an expansion module between two inputs, otherwise an error will be
displayed (see chapter "Error codes").
If there are free slots between the last occupied slot and the expansion module, these
slots will be taken into account to calculate the source numbers.