![background image](http://html1.mh-extra.com/html/barco/r9002372/r9002372_owners-manual_4229355019.webp)
Controlling
R5976381.01 BARCO CINE6 31012002 __________________________________________________________________________
4-3
How to program an address into the RCU.
To continue using the RCU, it is necessary to enter the address shown in the 'Text Box' with the digit keys on the RCU.
For example, if the displayed address is ' 003 '. press 3 on the RCU.
Input selection.
* Input signal Y/C (luma/chroma)
Two possible ways of selecting an input :
a.
With the digit keys on the RCU.
b.
with the local keypad.
Press first the
ADJUST
key to display the
GENERAL ACCESS
menu
.
Use the control keys to highlight the desired number.
Press
ENTER
to confirm your selection.
When a valid and connected source is selected, information about that source will be displayed in a 'Text Box' on the screen.
This information includes :
- Source Number.
- Horizontal scan rate
- Vertical scan rate.
When the entry is an invalid source number, a warning appears on screen
Input not available.
When a valid source number is selected, the projector will display this source or it will wait until the source becomes available.
A message
Source not available
will be displayed for a short time.
Warning
Input not
available
Source 2
Fh = 31.5 khz
Fv = 60 hz
Warning
source not
available
Source No Projector input
Press digit
1
Comp. Video
1
2
S-Video*
2
3
RGB/15K/32K
3
4
HDTV(Gs)
4
Muse
5
YUV
5
6
YUV on HDTV
6