![background image](http://html1.mh-extra.com/html/barco/r9002372/r9002372_owners-manual_4229355051.webp)
Service Mode
R5976381.01 BARCO CINE6 31012002 __________________________________________________________________________
7-9
Common Settings
Highlight 'Common settings' by pushing the control arrow up or down and press ENTER to display
the common settings menu.
Within the common settings menu, the following items can be set up or executed :
- G2 adjustment
- CRT run in cycle
- Projector Warm Up
- CRT Drive Mode
- Memory Bank
- Offset Correction
G2 Adjustment
Item is password protected.
Highlight 'G2 adjust' with the control arrow and press ENTER to continue.
A safety notice will be displayed on the screen as it is necessary to open the top cover to adjust
the G2.
ENTER
selects the G2 adjustment.
EXIT
returns to the Common settings menu.
ADJUST
returns to the Operational mode.
'G2 adjustment should be performed by BARCO personnel, or BARCO authorized
dealers'.
If you are qualified, press ENTER to continue. if not qualified, press EXIT to return to the Commmon
settings menu. Further description of the G2 adjustment is given in the installation manual.
CRT run in cycle
The CRT run in cycle option can only be activated when memory blocks on an internal # pattern
are available. When one or more such blocks are available, a flashing white image (5 sec on, 5
sec off) is generated and that for 5 min on the first internal block. In the next 5 min, a second internal
block will be used to generate the flashing white image. The image will also be shifted in a vertical
way to prevent a CRT burn in. To quit the CRT run in cycle opti9on, press EXIT.
Highlight 'CRT RUN IN CYCLE' with the control arrow and press ENTER to start.
ENTER
selects the CRT run in cycle option.
EXIT
returns to the Path Selection main menu.
If a memory block adjusted on an internal # pattern is available.
The CRT run in cycle will start when pressing ENTER. If no such a block is available, the projector
cannot run the CRT run in option and leaves the adjustment mode.
If you still want to run CRT run in cycle, create first a memory block on an internal # pattern and restart the CRT run in option.
ENTER starts the 'CRT run in' when an internal generated # pattern is available.
EXIT returns to the Path Selection main menu.
SERVICE MODE
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
COMMON SETTINGS
or
<EXIT> to return
then <ENTER>
Select with
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MEMORY BANK : OFF
OFFSET CORRECTION
COMMON SETTINGS
or
<EXIT> to return
then <ENTER>
Select with
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MEMORY BANK : OFF
OFFSET CORRECTION
COMMON SETTINGS
or
<EXIT> to return
then <ENTER>
Select with
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MEMORY BANK : OFF
OFFSET CORRECTION
SAFETY
NOTICE
RISK OF ELECTRICSAL SHOCK
G2 ADJUSTMENT SHOULD BE
PERFORMED BY BARCO
PERSONNEL, OR BARCO
AUTHORIZED DEALERS.
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE OR
IF NOT, <EXIT> TO RETURN