![background image](http://html1.mh-extra.com/html/barco/r9002372/r9002372_owners-manual_4229355044.webp)
Service Mode
7 - 2 _________________________________________________________________________ R5976381.01 BARCO CINE6 31012002
Projector Set-up
Highlight
PROJECTOR SET-UP
with the arrow keys and then press
ENTER
, to display the projector Setup menu.
Within the projector setup menu, the following items can be setup :
- Identification
- Total run time
- Change password
- Change language
- Change projector address
- Change baud rate
- Powerup mode
- Common address
- Barco logo
Identification
Highlight
IDENTIFICATION
using the arrow keys and then press
ENTER
.
The Identification screen displays information concerning :
-
Projector address.
: To change the address of your projector,
contact a qualified service technician.
-
Software version.
-
Configuration
.
Possible configurations :
Front ceiling
Front table
Rear ceiling
Rear table
-
Baud rate PC
. : Transfer speed for communication with an IBM PC or MAC. The Baud rate of the projector must be the
same as that of the connected computer. When there is a difference, contact a qualified service technician to make the
required changes.
-
Text on/off
. : Indicates in operational mode if the bar scale and value will be displayed and if warnings will be displayed.
ON
: displayed
OFF
: not displayed
The status can be changed by pressing the TEXT key once on the RCU.
-
Serial No
. : Indicates the manufacturing serial number of the projector. This number can be useful when technical
assistance is required.
SERVICE MODE
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SET-UP
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUD RATE
POWERUP MODE : Standby
COMMON ADDRESS
BARCO LOGO
IDENTIFICATION
Cine 6
PROJ. ADDRESS : 0
SOFT. VERSION : 1.01
CONFIG.
: front /
table
Baud Rate PC
: 9600
Text
: on
Serial No.
: 10359852