![background image](http://html1.mh-extra.com/html/barco/r9002240/r9002240_owners-manual_4225612047.webp)
Service Mode
7-7
5975688 BARCOVISION 1609s 131097
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE PROJECTOR
THE GAMMA CORRECTIONS ARE
FACTORY ADJUSTED USING AN
ACTAS COLOUR ANALYSER !
THEREFORE, ONLY QUALIFIED
INSTALLTION OR SERVICE
PERSONNEL SHOULD PERFORM
THESE ADJUSTMENTS !
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MORE...
<ENTER> TO CONTINUE
<EXIT> TO RETURN.
Select with or
then <ENTER>
<EXIT> to return.
given in a text box on the screen. When all areas are adjusted, press
EXIT to return to the service main menu.
G2 Adjust
Item is password protected.
Highlight '
G2 adjust
' with the control disk and press
ENTER
to
continue.
A safety notice will be displayed on the screen as it is necessary to
open the top cover to adjust the G2.
'G2 adjustment should be performed by BARCO personnel,
or BARCO authorized dealers'.
If you are qualified, press
ENTER
to continue. If not qualified, press
EXIT
to return to the Service mode main menu. Further description
of the G2 adjustment is given in the Installation manual.
SAFETY
NOTICE
RISK OF ELECTRICAL SHOCK
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN.
G2 ADJUSTMENT SHOULD BE
PERFORMED BY BARCO
PERSONNEL, OR BARCO
SERVICE MODE
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MORE...
Gamma corrections
Item is password protected.
Highlight '
Gamma Corrections'
with the control disk and press
ENTER
to continue.
A warning will be displayed on the screen as there is a risk of
incorrect adjustment of the projector..
'The Gamma Corrections are factory adjusted using an
ACTAS colour analyser !
Therefore, only qualified installation or service personnel
should perform these adjustments !'
If you are qualified, press
ENTER
to continue. If not qualified, press
EXIT
to return to the Service mode main menu. Further description
of the Gamma Corrections are given in the Installation manual,
Appendix C.
CRT run in cycle
The CRT run in cycle option can only be activated when memory
blocks on an internal # pattern are available. When one or more such
blocks are available, a flashing white image (5sec on, 5 sec off) is
generated and that for 5 min on the first internal block. In the next 5
min, a second internal block will be used to generate the flashing white
image. The image will also be shifted in a vertical way to prevent a
CRT burn in. To quit the CRT run in cycle option, press EXIT.
Highlight
'CRT run in cycle'
with the control disk and press
ENTER
to start .
If a memory block adjusted on an internal # pattern is available, the
CRT run in cycle will start when pressing
ENTER
. If no such a block
is available, the projector cannot run the CRT run in option and leaves
the adjustment mode.
If you still want to run CRT run in cycle, create first a memory block
on an internal # pattern and restart the CRT run in option.
SERVICE MODE
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MORE...
CRT RUN IN CYCLE
A flashing white pattern will be
generated until <EXIT> is pressed.
The projector only uses memory
blocks adjusted on an internal
# pattern; if no such block is
available, the projector can't run
the procedure and leaves the
adjusment mode.
<ENTER> to continue
<EXIT> to cancel
Содержание R9002240
