![background image](http://html1.mh-extra.com/html/barco/r9002240/r9002240_owners-manual_4225612020.webp)
Controlling
4-4
5975688 BARCOVISION 1609S 131097
36
Analog Picture Controls
The analog picture controls can be adjusted with the RCU. The control keys are
located on the lower right side of the key panel of the RCU and indicated with the name
of the control and an icon.
When an analog picture control is pressed, a text box with bar scale and the function
name of the control, e.g. 'brightness...' appears on the screen (only if
'TEXT'
is ON).
The length of the bar scale indicates the current memorized setting for this
source. The bar scale changes as the + or - buttons of the control are pressed.
Brightness Control
A correct
'brightness'
setting is important for good image reproduction. Adjust the
brightness with the + button and - button (RCU) until the darkest parts of the picture
appear black.
A bar scale gives a visual indication on the screen of the current brightness setting
while pressing on the above indicated keys. If the bar scale is not visible on the screen, press '
TEXT
' key once and retry the above indicated
keys.
The bar scale increases when pressing on the + button (higher brightness) and decreases when pressing on the - button (lower brightness).
Contrast Control
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting conditions. If the Contrast Control is too low, the picture will be too dim.
If it is set too high, the picture may be too bright and not sharp.
A bar scale gives a visual indication on the screen of the current contrast setting while pressing the + or - buttons (RCU). If the bar scale is
not visible on the screen, press '
TEXT
' key once and retry the above indicated keys.
The bar scale increases when pressing on the + button (higher contrast) and decreases when pressing on the - button (lower contrast).
Color Saturation Control
Color saturation is only active for Video and S-Video Inputs. This control adjusts the color intensity of the picture. Adjust the color saturation
using the + and - buttons (RCU). A bar scale gives a visual indication on the screen of the current color setting while pressing on the above
indicated keys. If the bar scale is not visible on the screen, press '
TEXT
' key once and retry the above indicated keys. The bar scale increases
when pressing on the + button (richer colors) and decreases when pressing the - button (lighter colors).
Tint Control
Tint is only active for Video and S-Video Inputs. The Tint Control is effective only when using the NTSC 4.43 or NTSC 3.58 system. A bar scale
gives a visual indication on the screen of the current tint setting while pressing the + or - buttons (RCU). If the bar scale is not visible on the
screen, press the '
TEXT
' key once and retry the above indicated keys buttons.
The bar scale increases when pressing on the + button (greener flesh tones) and decreases when pressing the - button (redder flesh tones).
Sharpness Control.
Sharpness control only active for Video and S-Video Inputs. A bar scale gives a visual indication on the screen of the current sharpness setting
while pressing the + or - buttons (RCU). If the bar scale is not visible on the screen, press '
TEXT
' key once and retry the above indicated keys.
The bar scale increases when pressing on the + button (sharper picture) and decreases when pressing on the - button (softer picture).
Controlling chained projectors.
Projectors can be controlled individually as well as in a group.
For individual control see previous pages.
For group control of the projectors.
(input selection and analog picture control)
Program the 'zero address' into any RCU. Therefore, press on the address key and key in the address ("0") with the numeric keys on the RCU
itself.
Once address '0' is pressed, all projectors will be controlled together until a new address is entered on the RCU. It is possible to have a common
input selection and a common analog picture control.
Once a new address is entered, only the projector with that specific address will follow the new instructions.
Note : For group control, all projectors in a control group must be capable of receiving the IR signal from the controlling RCU at the same time.
BRIGHTNESS
Содержание R9002240
