![background image](http://html1.mh-extra.com/html/barco/r9001440/r9001440_adjustment-manual_4261448012.webp)
R9001440/9
GRAPHICS
Uniformity Adjustments
Date:10/02/2000
6300
12
Uniformity Correction Adjustments
Setting Noise
Reduction level at 0
In order not to disturb the adjustment of the input balance, put the noise reduction
at 0 level. Proceeds as follows:
Running the Program
Type UNI <return>. The program consists of the following steps.
Step 1 : Input projector
data
From the ADJUSMENT MENU, select
consecutively RANDOM ACCESS, PICTURE
TUNING and after all NOISE REDUCTION.
Press
ENTER
to select.
Adjust the value of the Noise Reduction level
at 0 by pushing the cursor key
ç
.
Press EXIT three times to return to operation
mode.
Uniformity procedure V1.0
Step1: Input projector data
Serial port for communication with projector
1. COMM1
2. COMM2
Your choice: _
Give the the PC COMM-port for the projector control. According to the diagram on
page10, COMM2 port of the computer is connected to the RS232 IN of the projector,
so type in number 2 and press
ENTER
.
Uniformity procedure V1.0
Step1: Input projector data
Projector address (0-255):_
Give the projector address, type in number 1 and press
ENTER
(crosscheck with
address number displayed on Startup Menu)
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
AUDIO TUNING
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
NOISE REDUCTION
0
8
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE