Barco OV-508, Руководство по установке

Страница: 43 / 73

5. Installation
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
________________________________ ________________________________ ________________________________________________ ________________ ________________ ________________ 38
Step5
All other screens of the bottom row are installed
following the procedure below:
Apply the 4x2 screws to block the vertical movement.
Step6
Screw in the horizontal movement screws until the
screen front is moved approx. 1mm against the
vertical frame towards the horizontal movement
screw.
Hang the screen on the pins. Make sure that the
horizontal movement screws always show towards
the border of the display wall – this means that the
left neighbor of the static screen is rotated by 180°
compared to the right neighbor of the static screen.
Lock the 4 securing screws from behind.
The horizontal movement screws of all screens right to the static screen look in the same
direction.
The horizontal movement screws of all screens left from the static screen also look in the same
direction, but opposite to the horizontal movement screws of the screens right to the static
screen.
Step7
After locking the screen there will be a screen gap to
the neighbored screen of around 1mm.
To close this gap, drill out (turn left) the horizontal
movement screw.
The screen is now moving and the gap will be closed.
Never drill only one of the horizontal movement screws completely out before turning the
seconed!
Make several turns on one screw and than go to the second, turn it, go back to the first …
continue until the gap is closed.
Step8
Completely remove the horizontal movement screws!