Barco NX--4, Руководство по установке

Страница: 36 / 93

4. Components of a NX fixed tile
4.4 NX fi xed tile inner cabling
NX fi xed tile inner HDMI cabling
While con fi guring the NX fi xed display with the Director toolset, the DX-700 digitizer will scan all connected tiles of the installed
LED-wall and automatically assign a logical address number to each tile. The address number is independable of the location of the
NX tile in the LED-wall. This way each NX tile knows its exact location in the LED-wall, so each NX control box knows which part
of the active area (canvas) it has to cover. For that it is important that the control box knows which port is connected to which side.
So, for each NX tile the integrated HDMI cables must be equally connected with the NX control box. Seen from the rear of the NX
tile the inner cabling is as follows:
• HDMI port 1 of the NX control box has to lead to the bottom side of the NX fi xed tile.
• HDMI port 2 of the NX control box has to lead to the right side of the NX fi xed tile.
• HDMI port 3 of the NX control box has to lead to the left side of the NX fi xed tile.
• HDMI port 4 of the NX control box has to lead to the top side of the NX fi xed tile.
4
3
1
2
5
6
7
Image 4-11
1 Female HDMI connector leading to data port 1 of the NX control box (The cable has been marked with red).
2 Female HDMI connector leading to data port 2 of the NX control box (The cable has been marked with green).
3 Male HDMI connector leading to data port 3 of the NX control box (The cable has been marked with blue).
4 Male HDMI connector leading to data port 4 of the NX control box (The cable has been marked with yellow).
5 Female power plug which fi ts in the power socket of the control box.
6 Integrated female plug of the power split cable.
7 Integrated male plug of the power split cable.
W
ARNING
:
Pay special attention: the illustration above is seen from the back side of the NX fi xed tile!
NX fi xed tile inner power cabling
Just as the HDMI cables, the power cables link the NX tiles together but they are only connected in a vertical direction. The C13
power plug of the power split cable is inserted in the power socket of the NX control box.
32 R59770279 NX FIXED 16/06/2008