Barco NX--4, Руководство по установке

Страница: 76 / 93

10. SERVICING
5. Insert one NX module removal tool above and one NX module removal tool below the NX module, which you want to remove, as
illustrated. Make sure that the tabs of the removal tool are facing the NX module which you want to remove.
Caution: Make sure that the NX display is powerless while using the NX module removal tool. Neglecting this may result in
damage of the NX module and or neighboring NX modules.
Caution: Always insert the removal tool in the horizontal adjoining edge of two NX modules. Never insert the tools in the
vertical adjoining edge.
Image 10-5
6. Remove the NX module from the NX fi xed display by pulling both removal tools with equal force.
Image 10-6
Caution: While removing an NX module always keep the LED side of the NX module parallel with the LED side of the remaining
neighboring NX modules. This to avoid any mechanical stress upon the corners of the NX module.
=
=
=
Image 10-7
7. Securely hold the NX module and disconnect the data/power link cable(s) from the back side of the NX module.
72 R59770279 NX FIXED 16/06/2008