RS232 Protocol NSL-4601
40 of 58
3.3.16
Read Color setting status(only for single monitor)
This function is for updating current all color menu setting status of selected one monitor. This is
not available in all set or group selected.
See 3.1.1 Read (only ONE SET selected)
3.4 PICTURE
3.4.1
PICTURE MODE (USER-HIGH/DYNAMIC-MIDDLE/STANDARD-LOW/MOVIE-
MILD, Default = MIDDLE(PC,DVI)/STANDARD(COMPONENT,S-VIDEO,AV))
User : User can adjust Brightness, Contrast, Color(Saturation), Tint(Hue), Sharpness value as uaer
want to adjust.(Tint – at S-Video/AV input , Color/Sharpness – Component/S-Video/AV input )
High : Brightness and Contrast value is a little high in PC/DVI.
Middle : Brightness and Contrast value is Normal in PC/DVI.
Low : Brightness and Contrast value is a little low in PC/DVI.
Dynamic : Brightness, Contrast and Sharpness value is a little high in COMPONENT/S-VIDEO/AV.
This is good for dynamic picture viewing situation such moving picture as sports.
Standard : Brightness and Contrast value is Normal in COMPONENT/S-VIDEO/AV.
Movie : Brightness and Contrast value is a little low in COMPONENT/S-VIDEO/AV.
This is good for movie.
Mild : Brightness and Contrast value is a little low in COMPONENT/S-VIDEO/AV.
This is good for smooth picture viewing situation.
Send to monitor
Head
(char-2Bytes)
ID
(char-3Bytes)
Send Cmd
(char-3Bytes)
Cmd end
(char-1Byte)
K: 000
PM0
.
Send Cmd
(char-3Bytes)
MODE
(PC, DVI)
MODE
(COMPONEN
T,S-
VIDEO,AV)
PM0 USER USER
PM1 HIGH
DYNAMIC
PM2 MIDDLE
STANDARD
PM3 LOW
MOVIE
PM4 MIDDLE MILD
Reply to PC
ID
(char-3~5Bytes)
Return Cmd
(char-4Bytes)
Data
(char-1Byte)
Data End
(char-2Bytes “\r\n”)
ACK
(Hexa-1Byte)
(0) PIM=
0
\r\n 0x06
