Barco Njord, Руководство по установке

Страница: 64 / 232

R5913593 /01 Njord 64
5.3 Start image projection
Connect the source
1. Connect the source cable with the appropriate input port on the Input & Communication module.
Tip: See chapter “ Input & Communication ” , page 83, for more info about supported input
formats.
Image 5 – 9 Example of connecting an HDMI source.
2. Check if the SYNC LED lit up ORANGE (reference 1). This indicates that the sync is detected on the input
signal.
1
Image 5 – 10
Select the source
1. Press the Input button (reference I ) on the remote control or local keypad.
I
I
Image 5 – 11
The Source selection menu opens on the LCD display.
Getting Started