Barco NGS-D200, Руководство пользователя

Страница: 43 / 90

Chapter 8: Streaming
l
Unicast: Clients matching this rule are allowed to make unicast connections
l
Preemptible: Manages the number of active connections to the encoder. If another client is currently connected
and a second client attempts to connect to that encoder (when Preemptible is set to "Yes") the original client will be
preempted (disconnected)
l
Multicast Init.: Clients matching this rule are allowed to initiate a multicast session (does not imply participation)
l
Multicast Join: Clients matching this rule are allowed to participate (join) a preconfigured multicast session
l
Init Multicast: Clients matching this rule are allowed to initiate a multicast session (does not imply participation)
l
Join Multicast: Clients matching this rule are allowed to participate (join) a preconfigured multicast session
N
OTE: When you have finished making changes, click "Apply" at the bottom of the page. Click "Save Settings" to
permanently save your changes to the device.
8.2.11 Connection Manager Table
The Connection Manager Table is used to connect an NGS-D200 decoder directly to an encoder. The decoder can switch
connections to different encoders by selecting different entries from this menu.
Before attempting to make a connection, ensure that:
l
Both devices are operating in Standalone Mode
8.2.11.1 Adding an Encoder (Server) to Connect to
1. Click "Add" to add a new entry
2. Configure the following:
Field Default Value Valid Entries
Server N/A N/A
Port 6060 Valid port on the encoder
Bandwidth 10 M 0- maximum supported bandwidth of device
Multicast No Yes, No
Audio/Video Video Video, Audio, Both
Bidirectional No Yes, No
Table 8-5: Default/Valid Connection Manager Parameters
l
Server: Specify the IP address or host name of the encoder to connect to
l
Port: Specify the server port number on the encoder to connect to
N
OTE: The default server port for any V2D encoder is 6060.
l
Bandwidth: Specify the desired bandwidth for the connection (Mbps)
l
Multicast: Choose to enable multicast connections
l
Audio/Video: Specify the supported connection(s)
l
Bidirectional: Choose to enable transmission of audio in the reverse manner, from decoder to encoder
35
NGS-D200 User Guide