Barco NGS-D200, Руководство пользователя

Страница: 40 / 90

8.2.4 Force Splash Screen (Encoder)
You can choose to always display the splash screen, even if the encoder is actively encoding video. This is helpful if you
are having trouble displaying a video source and need to ensure the problem is not related to a network connection to the
decoder.
l
Force Splash Screen: Check the box to enable splash mode
l
Splash Mode: After enabling the check box, click "Splash Mode" to force the encoder to display the splash screen
N
OTE: When you have finished making changes, click "Apply" at the bottom of the page. Click "Save Settings" to
permanently save your changes to the device.
8.2.5 Encoder Control Port Range
If you need to adjust the default control ports range of a particular device, you can do so here.
l
Configure the following entries:
o
Control Port Start
o
Control Port End
N
OTE: When you have finished making changes, click "Apply" at the bottom of the page. Click "Save Settings" to
permanently save your changes to the device.
8.2.6 Multicast Parameters
You can adjust the multicast parameters of each system including the multicast address range and TTL.
N
OTE: By default, the system uses a mutlicast range of 226.1.1.1 - 226.1.1.50.
l
Configure the following fields:
o
Multicast Address Start
o
Mutlicast Address End
N
OTE: This field is not currently supported. Please specify the same address for the both Mutlicast
Address Start and Multicast Address End.
o
Multicast TTL (Time-to-live)
N
OTE: When you have finished making changes, click "Apply" at the bottom of the page. Click "Save
Settings" to permanently save your changes to the device.
8.2.7 Reverse Audio
Reverse audio will send audio from a Standalone decoder to encoder, enabling two-way communication between the
locations.
8.2.7.1 Notes
l
Reverse Audio can only be used by devices in Standalone Mode.
l
Reverse Audio must be enabled on both ends of the connection (encoder or decoder) via the Streaming page
K5903085
32
Chapter 8: Streaming