Barco Medea series, Руководство по установке

Страница: 30 / 74

R5906141 /02 Medea series 30
3.1 Installation process projector
Installation process from A to Z
1. Check if all installation requirements are fulfilled such as the environment conditions of the installation
area, electrical facilities, etc. For more info see “ Installation requirements ” , page 20.
2. Decide in which configuration the projector will be mounted. For more details see “ Projector
configurations ” , page 23.
3. Unpack the projector and confirm that all equipment is present and in good working order. See chapters
“ Unpacking the projector ” , page 21 and “ Initial inspection ” , page 23.
4. Mount the projector. For more details see chapter “ Physical Installation ” , page 31.
5. Installation of the lens. First select a lens with appropriate throw ratio covering the screen size and the
projector - screen distance. Then install the lens in the lens holder of the projector. For more information about
available lenses, lens selection and lens installation see chapter
“ Lenses ” , page 37.
6. Connect the source. For more details see chapter “ Input & Communication ” , page 49.
7. Power up the projector. See “ Power on projector ” , page 59.
8. Adjust the system and setup the image. For more information about setup see chapter “ Getting Started ” , page
57.
Note: Do not hesitate to refer to the user manual to obtain more information concerning the Graphical
User Interface (GUI).
Installation process