![background image](http://html1.mh-extra.com/html/barco/medea-series/medea-series_installation-manual_4187181063.webp)
R5906141 /02
Medea series
63
Image 7-4: IR control via reflective screen
Hardwired to the mini jack input
1.
Plug one end of the remote cable in the connector on the front side (3,5mm mini jack) of the RCU.
2.
Plug the other end in the connector on the communication interface of the projector, labelled
‘
Remote
CTRL
’
(reference 1, Image 7-5).
1
Image 7-5
Note:
Plugging the remote control will switch the broadcast address of the remote control to the
default value '0'. This is the only broadcast address that will work when hardwired. If you want to
change the broadcast address after disconnecting the remote control, see
, page
Pointing directly to the IR sensor
When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft
in a straight line). The remote control unit will not function properly if strong light strikes the sensor window or if
there are obstacles between the remote control unit and the projector IR sensor.
Содержание Medea series
