Input selection
9
menu. They may be disabled in the Setup menu.
See
Setup
, on
page 24
.
Note:
It can be that some of the inputs listed above can not be enabled
for your specific display configuration. For an overview of the possible
configurations, consult the connectors paragraph of the Getting Started
Guide.
Alias names
You can add alias names to the available inputs to make it easier for the
user to know what video source is connected to which input. E.g., if an
endoscopic camera is connected to the S-Video1 input, you can add the
alias ‘Endoscope’ to the S-Video 1 input.
To enter an alias name:
1.
Select the desired input in the Input Selection menu.
2.
Press
for a few seconds, until ********** is added to the menu
line.
3.
Now use and to select the first character.
4.
Use
to go to the next character.
5.
Repeat steps 3 and 4 to make the alias name.
6.
Use to delete the last entered character (like backspace on a
computer keyboard).
7.
When the alias name is completed, you must use
until the last
* is cleared.
8.
To cancel the text edit
without saving
, press and for 2
seconds.
The alias names will appear in the Input Selection, Source Priority and
Enable Inputs menus, but only in the Input Selection menu you can
define or change them.
