Setup
24
Setup
Setup menu
This menu contains a number of display settings.
Item
Description
Camera selec-
tion
Lets you select a camera (see below).
Enable inputs
Takes you to the Enable inputs submenu (see
below). This allows you to enable and disable
inputs.
Source priority
Takes you to the Source priority submenu (see
below). This allows you to assign priority to a
video input.
Source scan
Use Enter
to switch source scan on or off. When
switched on, the display will automatically scan
the video inputs and check if the selected video
signal is present.
GPIO interface
(1/2)
Takes you to the GPIO (General Purpose Input-Out-
put) function submenu to define the behavior of
the general purpose switch (see below). Two GPIO
switches can be connected to the GPIO interface.
There is a GPIO interface menu for each switch.
GPIO position
(1/2)
This menu line is visible when the corresponding
GPIO function is set to
Text
. It takes you to the
GPIO text position submenu (see below) where
you can select from 6 locations where the GPIO
text should be displayed on the screen.
