On-screen display (OSD)
5
5.
To exit from a submenu
, use the navigation keys or to
select
EXIT
. Next, press Enter
.
If you exit from the Main Menu, you exit the OSD.
6.
To change an adjustment value or setting
, use the navigation
keys
or
to select the adjustment or setting. Next, press Enter
to go into edit mode. This is indicated by the scroll bar turning
gray and the adjustment bar turning red.
Use the navigation keys or to change the value. Use Enter
to confirm the change.
Changes are saved automatically when you exit from the OSD.
Tips:
While you are adjusting a value:
• Touch
and
at the same time to reset to the factory-default
value.
• Touch first and then
while still holding to select the
minimum value.
• Touch first and then
while still holding to select the
maximum value.
While navigating in the OSD submenus:
• When any non-adjustable or name change menu item is
selected, pressing the Enter
key for a long time
closes the
OSD
while saving the changes.
When the display is in stand-by, touch and hold the Stand-by
soft touch key for about 2 seconds until the display switches on.
To switch the display back in stand-by, touch and hold the Stand-
by soft touch key until the display switches off.
