Setup
26
OSD timeout
Takes you to the OSD timeout submenu (see
below).
RS232 baudrate
Takes you to the RS232 baudrate submenu (see
below).
Quick input
selection
Use Enter
to enable or disable the quick input
selection feature. When enabled, you can use the
navigation keys or to switch inputs while no
OSD is on the screen.
Power LED
Use Enter
to switch the (green) power LED on
or off. The (orange) stand-by LED is not influenced.
Power save
Use Enter
to switch the power save system on
or off. When switched on, the display will auto-
matically switch off when the connected video
signal falls away (e.g., computer goes in stand-
by).
User controls
Use Enter
to switch the user controls on or off.
When switched off, the user controls cannot be
used to display and use the OSD.
When the user controls are disabled, you can
enable them again by pressing the and keys
simultaneously for 5 seconds. Then navigate to the
Setup menu and switch User controls on again.
OSD menu
Use Enter
to disable/enable the OSD. When
disabled, the OSD will not appear when touching
the control keys. Only the quick input selection
and stand-by functions are enabled.
When the OSD is disabled, you can enable it again
by pressing the and keys simultaneously for
5 seconds. Then navigate to the Setup menu and
switch OSD menu on again.
Key Sound
Use Enter
to disable/enable the key sound (a
short beep sound) when touching the user control
panel keys.
Item
Description
