3. Display installation
3.5
Connecting the power cable
To connect the power cable to the display:
1. Connect the supplied external DC power supply to the +24 VDC power input of your Coronis Fusion
6MP display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper
power cord delivered in the packaging.
3.6
Routing the cables
To route the cables
1. Route all connected cables through the cable routing channel in the stand of your display.
Tip:
The cable straps at the inside of the connector compartment allow you to
fi
x the cables for better
shielding of the cables.
3.7
Re-attaching the covers
To re-attach the display stand cover
1. Slide the display stand cover downward. You’ll hear a “click” sound of the cover’s clips when the display
stand cover is in position.
K5902055 CORONIS FUSION 6MP 14/11/2014
11