![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148044.webp)
5. Troubleshooting
Code 6004: “Board id: input 1 write error” (Error)
Situation
Solution
Malfunction input board. The
projector can not write to the
installed input board.
Replace the input board.
Malfunction I²C communication on
the PMP board. Other input boards,
the Display board, the WARP module
and the Input & Communication unit
also have “Board id read errors”.
Remove/disconnect the other boards from the I²C communication line one by one and
check if this error remains. Replace the board which makes this error goes away. If none
of the boards is the cause of this error, replace the PMP board. See chapter XXXX, to
see which boards are connected to the same internal communication line.
Code 6005: “Board id: input 1 not calibrated” (Warning)
Situation
Solution
The installed input board has no
calibration values stored. The
projector will use default calibration
values for this input board.
No actions required. Parameters can be adjusted for the Analog Video applied on the
DVI connector. See projector’s user guide.
Code 6006: “Board id: input 1 type on wrong location” (Info)
Situation
Solution
Board type data found on unusual
memory location
No further action needed. Board will operate normally.
Code 6007: “Board id: input 2 unknown format” (Warning)
Situation
Solution
Old projector software installed. The
ID parameters of the input board
are written in a format which is not
known by the projector software.
Check if the version of the installed projector software is the latest available version. The
latest version can be downloaded from
https://my.barco.com
.
Input board has invalid
fi
rmware.
Replace the input board.
Corrupt projector software.
Reinstall the latest projector software.
Code 6008: “Board id: input 2 unknown module type” (Warning)
Situation
Solution
The input board inserted in this slot
is not supported by the software of
the projector.
Check if the version of the installed projector software is the latest available version. The
latest version can be downloaded from
https://my.barco.com
. To support a new type of
input board most likely requires an update of the projector software.
The installed input board is not
supported by the projector.
Replace the input board with a type that is supported by the projector.
Code 6009: “Board id: input 2 empty” (Info)
Situation
Solution
No input board present in this slot.
If desired, insert one of the supported input boards.
Code 6010: “Board id: input 2 read error” (Error)
Situation
Solution
Malfunction input board. The
projector can not read from the
installed input board.
Replace the input board.
Malfunction I²C communication on
the PMP board. Other input boards,
the Display board, the WARP module
and the Input & Communication unit
also have “Board id read errors”.
Remove/disconnect the other boards from the I²C communication line one by one and
check if this error remains. Replace the board which makes this error goes away. If none
of the boards is the cause of this error, replace the PMP board. See chapter XXXX, to
see which boards are connected to the same internal communication line.
40
R5905312 HDF W SERIES 24/01/2013
Содержание HDF W series
