Barco Galaxy NH-12, Руководство по обслуживанию

Страница: 104 / 146

7. Electronic parts and servicing procedures
- J1: from the in fi tec sensor
- J2: from the in fi tec slide
- J4: In fi tec sync from the PMP
- J5: I2C from the PMP
- J7: from the in fi tec SW
- J10: to the in fi tec motor
- J30: from DMD temperature switch
- J101: power and pulses from fan LPS vertical
- J102: power and pulses from fan LPS top
- J104: power to the cooling pump
- J110: fan supply to the X-fan supply
- J120: fan pulses towards the power box
- J130: +12V from the power box
- J220: from the lens shift safety switch
- J230: signals from the CLO/LFR sensor
- J400: to the LFR light feedback board
- J402: I2C to the LPS
- J403: data from the lamp info receiver
3. Remove the fi xing screws of the engine controller
Image 7-137
Engine controller:
fi xing screws
4. Remove the engine controller
7.12.3 Installing the engine controller
Necessary tools
Torx screwdriver T10
How to install the engine controller?
1. Put the engine controller in the correct position
2. Fix it using the fi xing screws
100 R59770141 GALAXY NH-12 20/02/2008