R5910886 /02
G60
7
•
Attempts to alter the factory-set internal controls or to change other control settings not specially discussed in this manual can lead to
permanent damage to the projector and cancellation of the warranty.
•
Remove all power from the projector and refer servicing to qualified service technicians under the following conditions:
-
When the power cord or plug is damaged or frayed.
-
If liquid has been spilled into the equipment.
-
If the product has been exposed to rain or water.
-
If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of the other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
-
If the product has been dropped or the cabinet has been damaged.
-
If the product exhibits a distinct change in performance, indicating a need for service.
•
Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts
or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitutions may result
in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitutions may void warranty.
•
Safety check: Upon completion of any service or repairs to this projector, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Safety Data Sheets for Hazardous Chemicals
For safe handling information on chemical products, consult the Safety Data Sheet (SDS). SDSs are available upon request via
[email protected].
1.3 Product safety labels
Light beam related safety labels for G60-W7 series
Label image
Label description
R G 2
Risk Group 2 of IEC60825-1:2014 and Class 3R Laser product of IEC 60825-1:2007.
Do not look into the laser light. The extremely high brightness may cause permanent
eye damage.
COMPLIES WIT
H
21 CFR 1040.10 AND
1040.11 EXCEPT FOR
DEVIATIONS PURSUANT
TO LASER NOTICE No. 50,
DATED JUNE 24, 2007.
IEC/EN 60825-1:2007
IEC/EN 60825-1 : 2007
LASER RADIATION - AVOID DIRECT EYE EXPOSURE - CLASS 3R LASER PRODUCT
Wave length : 449-461 nm / Max. Pulse energy : 0.52mJ / Pulse duration : 1.06 ms
IEC/EN 60825-1 : 2014 CLASS 1 LASER PRODUCT / RISK GROUP 2
WARNING : Possibly hazardous optical radiation emitted from this product.
Do not stare into the beam, May be harmful to the eyes.
IEC/EN 60825-1 : 2007
IEC/EN 60825-1 : 2014
IEC/EN 60825-1 : 2007
RAYONNEMENT LASER - ÉVITEZ TOUTE EXPOSITION DIRECTE DES YEUX -
PRODUIT LASER DE CLASSE 3R
Longueur d'ondes : 449 - 461 nm / Max.impulsion d'énergie : 0.52 mJ /
Durée impulsions 1.06 ms
IEC/EN 60825-1 : 2014 PRODUIT LASER DE CLASSE 1 / GROUPE A RISQUE 2
AVERTISSEMENT : Risquse possibles de rayonnements optiques émis par ce produit.
Ne pas regarder dans le faisceau. Peut être dangereux pour les yeux.
IEC/EN 60825-1 : 2007
IEC/EN 60825-1 : 2014
This product is classified as Class 1 Laser Product-Risk Group 2 of IEC 60825-1 :
2014 and Class 3R Laser product of IEC 60825-1:2007, complying with 21 CFR
1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated
June 24, 2007.
Light beam related safety labels for G60-W8 series
Label image
Label description
R G 2
R G 2
Risk Group 2, IEC60825-1:2014. Do not look into the laser light. The extremely high
brightness may cause permanent eye damage.
This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number XXXX-X-XXXX
effective [insert the date of the variance approval]
BARCO INC
3059 Premiere Parkway Suite 400, Duluth, GA 30097, USA
U.S.A. Only
FDA laser variance (US projectors only)
Содержание G60 Series
Страница 1: ...ENABLING BRIGHT OUTCOMES Safety manual G60...
