R5910886 /02
G60
3
1 Safety
About this document
Read this document attentively. It contains important information to prevent personal injury while installing and using the G60 projector.
Furthermore, it includes several cautions to prevent damage to the G60 projector. Ensure that you understand and follow all safety
guidelines, safety instructions and warnings mentioned in this chapter before installing the G60 projector.
Clarification of the term
“
G60
”
used in this document
When referring in this document to the term
“
G60
”
means that the content is applicable for following Barco products:
•
G60-W7, G60-W8, G60-W10
Model certification name
•
G60
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. Observing
the specification mentioned in this chapter is critical for projector performance. Neglecting this can result in loss of warranty.
1.1 General considerations
General safety instructions
•
Before operating this equipment please read this manual thoroughly and retain it for future reference.
•
Installation and preliminary adjustments should be performed by qualified Barco personnel or by authorized Barco service dealers.
•
All warnings on the projector and in the documentation manuals should be adhered to.
•
All instructions for operating and use of this equipment must be followed precisely.
•
All local installation codes should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1, UL60950-1
and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipment including electrical business
equipment. These safety standards impose important requirements on the use of safety critical components, materials and insulation, in
order to protect the user or operator against risk of electric shock and energy hazard and having access to live parts. Safety standards
also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength, enclosure construction
and protection against the risk of fire. Simulated single fault condition testing ensures the safety of the equipment to the user even when
the equipment's normal operation fails.
Laser safety precautions for G60-W7 series
This product is classified as Class 1 Laser Product-Risk Group 2 of IEC 60825-1 : 2014 and Class 3R Laser product of IEC 60825-1:2007,
complying with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.
To ensure safety operation, read all laser safety precautions before installing and operating the projector.
•
Class 3R Laser product. Do NOT deliberately look into or stare into the beam, which can cause injury to the retina in the back of the
eye.
•
This projector uses extremely high brightness laser. Never attempt to look directly into the lens or into the light beam. The bright light
may result in permanent eye damage. (Risk Group 2 of IEC 62471-5:2015).
•
When turning on the projector, make sure no one within projection range is looking into the lens.
•
Keep any reflective objects out of the light path of the projector. Glass and shiny surfaces can reflect the light beam from the lens as
the light path is extensive, and the reflective beam can cause unpredictable incident such as fire hazards or eye injuries.
•
Any operation or adjustment not specifically instructed by the user
’
s guide creates the risk of hazardous laser radiation exposure.
•
Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
•
Failure to follow the control, adjustment or operation procedures may cause damage by the exposure of laser radiation.
Laser safety precautions for G60-W8 series
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC 60825-1 : 2014 and also complies with 21 CFR
1040.10 and 1040.11 as a Risk Group 2, LIP ( Laser Illuminated Projector) as defined in IEC 62471:2006 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
According to IEC 60825-1:2014 and IEC 62471:2006, this projector may become CLASS 1 LASER PRODUCT - RISK GROUP 3 product
when installed with G LENS (2.90 - 5.50 : 1) lens (throw ratio 2.90-5.50).
To ensure safety operation, read all laser safety precautions before installing and operating the projector.
•
This projector uses extremely high brightness laser. Never attempt to look directly into the lens or into the light beam. The bright light
may result in permanent eye damage. (Risk Group 2 of IEC 62471-5:2015).
•
No direct exposure to the beam shall be permitted. (Risk Group 3 of IEC 62471-5:2015).
•
Possibly hazardous optical radiation emitted from this product.
•
This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the laser module.
•
Any operation or adjustment not specifically instructed in the User manual creates the risk of hazardous laser radiation exposure.
•
Do not stare into beam when the projector is on. When turning on the projector, make sure no one within projection range is looking
into the lens.
•
Follow the control, adjustment, or operation procedures to avoid damage or injury from exposure of laser radiation.
Содержание G60 Series
Страница 1: ...ENABLING BRIGHT OUTCOMES Safety manual G60...
