![background image](http://html.mh-extra.com/html/barco/flm-r20-performer/flm-r20-performer_user-manual_474095090.webp)
9. Image menu
How to change the
fi
eld polarity?
1. Press
MENU
to activate the menus.
2. Use the
▲
or
▼
key to select
Image
and press
ENTER
.
3. Use the
▲
or
▼
key to select
Advanced settings
and press
ENTER
.
The Advanced settings menu is displayed.
4. Use the
▲
or
▼
key to select
Field polarity
and press
ENTER
to toggle between [neg] or [pos].
Image 9-71
Image 9-72
Image 9-73
Image 9-74
9.5.3
Advanced settings,
fi
lm mode detection
About
fi
lm mode detection
This mode detects whether
fi
lm or video is displayed.
When enabled, the hardware looks for tell-tale signs of 3:2 or 2:2 pull-down sequences. These are the result of converting cinema
material recorded at 24 frames-per-second to the television frequencies of 60 or 50 interlaced
fi
elds per second respectively. When
FILM conversion is detected, the original 24 frames-per-second are restored. This avoids deinterlacing artefacts, and results in a
perfect artefact-free display. Note that in some cases (video clips, scrolling newstickers,...) FILM and VIDEO material are mixed
on one screen. This may confuse the detector and cause it to go into FILM restoration mode. This will cause "jaggies" or motion
artefacts. In such cases, disabling FILM mode processing is the best cure.
Film mode detection is only for interlaced sources.
3:2 pull-down
Method used to map the 24 fps of
fi
lm onto the 30 fps (60
fi
elds) or 25 fps (50
fi
elds), so that one
fi
lm frame occupies
three video
fi
elds, the next two, etc. It means the two
fi
elds of every other video frame come from different
fi
lm frames
making operations such as rotoscoping impossible, and requiring care in editing. Some sophisticated equipment can
unravel the 3:2 sequence to allow frame-by-frame treatment and subsequently re-compose 3:2. The 3:2 sequence
repeats every
fi
ve video frames and four
fi
lm frames, the latter identi
fi
ed as A-D. Only
fi
lm frame A is fully on a video
frame and so exists at one time code only, making it the editable point of the video sequence.
86
R5976921 FLM R20+ PERFORMER 15/03/2010
Содержание FLM R20+ Performer
