Barco FIMI MDSC8156, Руководство пользователя

Страница: 27 / 44

27
DVI 4 input
(Microcross™ DVI-D female connector)
Pin 1 : D2_RX - (T.M.D.S.)
Pin 13 : D3_RX + (T.M.D.S.)
Pin 2 : D2_RX + (T.M.D.S.) Pin 14 : +5V (from the video source system)
Pin 3 : GND (Data 2 shield) Pin 15 : GND
Pin 4 : D4_RX - (T.M.D.S.) Pin 16 : + 5V Power for DVI extenders
Pin 5 : D4_RX + (T.M.D.S.) Pin 17 : D0_RX - (T.M.D.S.)
Pin 6 : SCL (For DDC) Pin 18 : D0_RX + (T.M.D.S.)
Pin 7 : SDA (For DDC) Pin 19 : GND (Data 0 shield)
Pin 8 : N.C. Pin 20 : D5_RX - (T.M.D.S.)
Pin 9 : D1_RX - (T.M.D.S.) Pin 21 : D5_RX + (T.M.D.S.)
Pin 10 : D1_RX + (T.M.D.S.) Pin 22 : GND (Clock shield)
Pin 11 : GND (Data 1 shield) Pin 23 : CK_RX + (T.M.D.S.)
Pin 12 : D3_RX - (T.M.D.S.) Pin 24 : CK_RX - (T.M.D.S.)
RS-232
Main communication interface for FW upgrade, monitor management and data exchange.
(DSUB9 female connector)
Pin 1 : N.C.
Pin 6 : N.C.
Pin 2 : TX. Pin 7 : N.C
Pin 3 : RX Pin 8 : N.C.
Pin 4 : N.C. Pin 9 : N.C.
Pin 5 : GND
ETHERNET
LAN Interface RJ45
Connector for remote control
SELECT
This switch is used to select between RS232 and Ethernet for monitor remote control.
NOTE: for FW upgrade, only RS-232 port is active, so SELECT switch must be in the RS-232 position
NOTE:
the RS232 and Ethernet communication links, are only intended to be used by Service Personnel