Barco FIMI MDSC8156, Руководство пользователя

Страница: 7 / 44

7
1.2. Modification
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by the manufacturer
may void the user‟s authority to operate the
equipment.
1.3. Cables
Connections to the I/O ports must be made with shielded signal cables and metallic RFI / EMI
connectors to maintain compliance with Electromagnetic Compatibility Regulations..
The lighting flash
with arrowhead symbol is intend to alert the user of the presence of “dangerous
voltage” within the product‟s enclosure that may be a risk of electrical shock to people.
The exclamation mark is intended to alert the user of the presence of important operating and
maintenance (servicing) instructions in literature accompanying the appliance.
2. WARNING
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR EXCESSIVE MOISTURE.
THE ENCLOSURE HAS TO BE CHECKED UPON COLLISION DAMAGE; REFER TO
QUALIFIED SERVICE PERSONNEL
2.1. Power cord
Due to the different power cable lengths necessary at system level, the power cable is not provided with
this LCD panel.

in Europe, use a power cord H05VV-F or H05VVH2-F rated 0.75mm
2
250V, with a Plug rated 10A
250V. At least one European safety mark is required.

in US and Canada, use a power cord with plug
“hospital grade”, provided with instructions to
indicate that grounding reliability can be achieved only when the equipment is connected to an
equivalent receptacle marked hospital only or hospital grade. Rating, min 18 AWG SJT 60°C 300V,
Plug NEMA 5-15 P, Connector IEC 320. The cURus safety mark is required.

Contact the local dealer if you have doubt on the right cord set to be used.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.
DO NOT REMOVE COVER
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL