Barco FIMI MDSC8156, Руководство пользователя

Страница: 6 / 44

6
The product is engineered to meet the following Electromagnetic Compatibility Standards: EN 60601-1-2
(2007), IEC 60601-1-2 (2007), FCC CFR 47 PART 15 AND 18 (Class A) and can be placed next to other
sensitive equipment with no risk of harmful interference.
This 56" monitor is intended to be installed in a medical system only by trained system integrator.
In the medical systems where the life of the patient or the success of a clinical intervention depend from the
image displayed by this 56” monitor, an adequate backup solution has to be provided at medical system
level.
The following models shall be made available:
- MDSC8156 GR
full version (with protection glass & redundant power supply)
- MDSC8156 R light version (w/o protection glass, with redundant power supply)
- MDSC8156 basic version (w/o protection glass & redundant power supply)
Copyright ©
This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not
be copied, in whole or part, without written consent of BARCO. Under the law, copying includes
translating into another language or format.
The monitor described in this manual, has been certified / registered by the safety agencies /
regulatory authorities as model n°: BA56DS.
1.1. EMC Notice
1.1.1. FCC
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
1.1.2. IEC
This equipment/system is intended for use by healthcare professionals only. This equipment /
system may cause radio interference or may disrupt the operation of nearby equipment. It may be
necessary to take mitigation measures, such as reorienting or relocating the [EQUIPMENT or
SYSTEM] or shielding the location.
where “[EQUIPMENT or SYSTEM]” shall be replaced with the MODEL or TYPE REFERENCE of
the EQUIPMENT or SYSTEM.