![background image](http://html1.mh-extra.com/html/barco/f90-w13wuxga/f90-w13wuxga_user-manual_4186791050.webp)
5. Getting started
5.4.4
Going from ON to READY
Description
Press and hold the
Power on/off
button on the projector for 3 seconds, or press the
Power Off
button on the remote control. The
projector will power down through a cool down phase. The
Power on/off
button will BLINK WHITE during the transition from
ON
to
READY
. Once the projector is in
READY
, the
Power on/off
button will be lit WHITE.
5.4.5
Going from READY to ECO standby
Description
If ECO Standby mode is enabled in the service menu (refer to the section "GUI - system settings/Standby ECO", in User Guide) the
projector will automatically go to
ECO
standby mode after a time-out (default 15 minutes). All electronics (including fans, pumps,...)
go down except for a very small wake up controller. The
Power on/off
button will FLASH WHITE every second.
5.4.6
Going from ECO to ON
Description
Press the
Power on/off
button on the projector, or the
Power On
button on the remote control. The projector goes from
ECO
directly
to
ON
. The projector will go through the same booting phase as on power plugging, then do the transition from
READY
to
ON
. Of
course startup-time will be longer then from
READY
to
ON
.
5.5
Power modes
General
The table below details the F70 power modes.
Mode
Description
Normal
Projector is booted up and the light source is on
Ready
Projector is booted up but the light source is off
ECO Standby
Light source is switched off and projector electronics are
powered down
5.6
Customize projector settings
About
The projector display, behavior and user interface can be adjusted to meet individual requirements.
Options include:
Home/System Settings/Themes
•
Adjust the OSD menu color
5.7
User interface
Overview
•
5.7.1
On Screen Display (OSD)
About
The projector on screen display (OSD) is the primary user interface (UI). From here, you can review and adjust all projector and
display settings.
The OSD interface uses tabs to display the main menu. Topics are then further sorted and displayed by function: main (topic) —
sub (function) — sub (function).
There are six main menu tabs: Source, Image, Installation, System settings, Test pattern and Status.
The OSD can be disabled by pressing the OSD on/off button.
46
601–426 F70 SERIES 24/10/2017
Содержание F90 - W13WUXGA
