Barco EOS X Terminal, Руководство пользователя

Страница: 142 / 195

6. Advanced Configuration
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
_____________________________________________________________________
6-7
6.1.3 Inserting an additional expansion card
The expansion cards are made of delicate electronic components that are extremely
sensitive to static electricity. Ordinary amounts of static from your clothes or work
environment can destroy them. Transport expansion cards only in the original packaging as
delivered from the manufacturer. Handle them only by their edges and their metal
mounting bracket. Do not touch the components nor the edge connectors that plug into the
expansion slots. Use a grounded workplace and wear a grounding wrist strap; at least,
discharge your body’s static electricity by touching a grounded surface, e. g., a properly
grounded system’s metal chassis.
•
Please check first the restrictions given in section 6.1.5 Combination rules before inserting or exchanging an
expansion card.
•
Open the case as described in section 6.1.1 Opening the case !
•
Remove the bracket on the slot you intend to use. Keep the screw you have to remove and keep the bracket
for possible further use.
•
Examine the card before removing from the anti static bag. If there is any visible damage, do not install the
card and contact Barco.
•
Do not remove the card from the anti static bag until you are ready to install it. Use a grounded workplace.
Do not lay parts on the anti static bag. Only the insides are antistatic.
•
If you are inserting a Multiport I/O Card please check the jumper settings and order of the card first, see
section 6.1.6 Multiport I/O Card .
•
Carefully align the card’s connectors with the socket and press firmly. The ISA retainer at the end of the card
or the end of the card itself must be fitted into the respective guide if there is any.
3
1
2
1 Card
2 Bracket
3 guide at ventilation case / ISA retainer
Figure 6-6
Inserting an expansion card
•
Secure the card on the slot with the screw you removed in step 2.
•
If you have inserted a UGX-/AGX G
RAPHIC
C
ARD
or a graphic card with digital output you have to select the
appropriate resolution with a rotary switch on the board as described in section 6.1.4 Switching resolution of
graphic card .
•
Replace the top cover.
After inserting an additional graphic card you have to repeat system configuration as
described in section
3.4.2 X.11 configuration .