4. Operating
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
4-26
Configuration of RGB input
The D
UAL
RGB
I
NPUT
C
ARD
digitizes monitor signals with a pixel frequency to 270 MHz. The video client is pre-
configured for displaying most common VESA-timings.
Since most monitor signals differ slightly from the VESA-timings, the user can adjust the pre-configured modes to
the provided monitor signals. Also additional timings can be entered and stored as new presets.
For configuring the D
UAL
RGB
I
NPUT
C
ARD
it is useful to have a suitable test pattern, basically thin black and white
vertical lines:
Windows 95/98/NT,
Macintosh,
PowerMacintosh
Switch desktop pattern to alternating, one pixel wide, black and white vertical
lines
Sun Workstation
In console window (
cmdtool
) enter
xsetroot -mod 4 4
,
(enter
xsetroot -mod 4 4
for removing the pattern again)
Others
Display text, which contains many
HHHHHHH
.
Table 4-8
Adjusting the preset
•
Set up a suitable test pattern on the connected computer.
•
Start the video client
xvideo
.
•
Select the input channel in the
Control
tab (
Channel 1
or
Channel 2
).
Figure 4-11
Configuring RGB input
•
Switch to the
Input Settings
tab and press
Auto
. This will automatically detect the source and set the right
preset.
•
If necessary switch to the
Input Settings
tab and tune
PLL Devider
(approx. 1.3 × horizontal size) until the
test pattern is displayed correctly.
•
Align the display within the window with
Position
.
•
If necessary tune
Phase
until the test pattern is displayed without flicker.
Содержание EOS X Terminal
Страница 1: ...User s manual Eos X Terminal...
