Barco EOS X Terminal, Руководство пользователя

Страница: 44 / 195

3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
3-26
Connecting to Eos
The data connection between E
OS
and an E
OS
E
XTENDER
is established with a ribbon cable or with a round cable.
Figure 3-35
Ribbon cable (left) and round cable (right)
connecting E
OS
and E
OS
E
XTENDER
The cable between E
OS
and the E
OS
E
XTENDER
is fragile. It may not last under tension, or being
bent or twisted.
Therefore, in both E
OS
and the E
OS
E
XTENDER
a PCI card is inserted. I. e., in E
OS
one PCI slot is reserved.
Connecting several Eos Extenders
The number of E
OS
E
XTENDERS
, which can be connected to E
OS
, is equal to the number of free PCI slots on its main-
board.
Order
The expansion cards are inserted in the PCI slots with the lowest numbers. If more than one E
OS
E
XTENDER
is con-
nected, they are numbered in the sequence of the PCI slots.
PCI
Ext.
Box
1
PCI
Ext.
Box
3
PCI
Ext.
Box
2
PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6
Figure 3-36
connection cards to the E
OS
E
XTENDERS