Barco E-2621, Инструкция по установке и эксплуатации

Страница: 92 / 131

Display operation
92 Nio MKII
4.
Rotate the control wheel to select
User Controls
.
5.
Press the control wheel to switch from “On” to “Off”.
6.
Exit the menus.
To enable user controls:
1.
Do not use the control wheel for at least 3 seconds.
2.
Rotate the control wheel 1 step clockwise.
3.
Press the control wheel 2 times.
4.
Rotate the control wheel 1 step counterclockwise. The on-screen
display appears.
Note:
Steps 2 to 4 must be performed in maximum 3 seconds.
5.
Rotate the control wheel to select
Settings
.
6.
Press the control wheel to enter the Settings menu.
Figure 43: Settings menu
7.
Rotate the control wheel to select
User Controls
.
8.
Press the control wheel to switch from “Off” to “On”.
9.
Exit the menus.
SETTINGS
DPMS On
Power LED On
User Controls Off
EXIT