Checking factory settings
36
Nio 2-3-5 MP
7.1 Checking factory settings
To check the factory settings:
1. Start the program
Mfdcontrol.exe
.
2. In the main menu, select the display of which you wish to check
the settings.
3. In the main menu, click on the button
General
.
The General information window appears
4. In the General information window, check the following items:
- Is the display
serial number
correct?
- Is the display
stock number
correct?
- Is the display
type
correct?
- Option
DPMS
must be checked.
- Option
Stabilizer
must be checked.
- Option
Power LED
must
not
be checked.
5. In the
Backlight
section at the bottom of the window, there is a
slider. Move the slider between minimum and maximum. The
backlight of the panel should change between minimum and
maximum. As another consequence, the Stabilizer option is dese-
lected again.
6. Select the
Stabilizer
option again. The luminance value next to
the slider should go to the calibrated value (see Technical Specifi-
cations) again.
Содержание E-2320 C
