Signal board replacement
26
Nio 2-3-5 MP
2. Remove the 11 screws fastening the board.
3. Remove the board.
6.5.6 Re-assemble the display
Mounting instructions:
To mount the parts again, follow the procedure in reverse order.
6.5.7 Write display parameters in the display
To write the EDID PROM content:
1. Start the software tool “
Mfdcontrol.exe
” (version August 12 2002
at least).
2. In the main menu, select the proper display.
3. In the main menu, click on
EDID.
4. Click on
Load
and locate the proper file.
5. Click
Open
to select the file.
6. Click on
Write
(EDID PROM) to write the contents in the new EDID
PROM.
To write the EEPROM data:
1. Start the software tool
Mfdcontrol.exe
.
2. In the main menu, select the proper display.
3. Click on
Upload
.
4. In the Upload window, click on
File to EEPROM
and locate the
proper file.
5. Click
Open
to select the file.
6. The data is written into the display EEPROM.
About the Nio 2MP EDID PROM
For Nio 2MP, it is not necessary to store the EDID-PROM content on PC.
The EDID PROM content is stored within the EEPROM. Each time the
display starts up, the EDID PROM content is loaded from the EEPROM.
Содержание E-2320 C
