Barco Coronic Uniti, Руководство пользователя

Страница: 52 / 74

K5902079-07 Coronis Uniti 52
7.1 Repacking your Coronis Uniti system
How to repack your Coronis Uniti system
1. Insert the connector cover in the small buffer.
Image 7-1
2. Lock the height mechanism at the lowest display position by inserting the hook pin in the back of the stand.
Caution: Make sure that the hook pin is inserted deep enough until only the red part of the pin is
visible.
Image 7-2
3. Remove the tilt lock pin from the back of the display, if this was not yet done during installation.
Repackaging instructions