Barco Coronic Uniti, Руководство пользователя

Страница: 16 / 74

K5902079-07 Coronis Uniti 16
3. Keep the pin in the dedicated hole in case the display needs to be shipped later.
To retain the pin for possible future transportation, insert the short, red end of the pin back into the
stand of your display.
3.4 Adjusting the display position
In the factory, the height-positioning and the tilt system in the display stand are locked with red pins
to prevent damage during transportation. You
’ ll have to remove both pins before adjusting your
display position.
To adjust the display position
1. Remove the tilt lock pin, see “ Unlocking the tilt mechanism ” , page 14.
2. Remove the height lock pin in the display stand, see “ Unlocking the height mechanism ” , page 15.
3. Tilt, swivel, raise and lower the display as desired.
Display installation