![background image](http://html1.mh-extra.com/html/barco/cine-7-r9002380/cine-7-r9002380_owners-manual_473930059.webp)
7-17
5976066 BARCOCINE 7 07022000
Random Access Adjustment Mode
Select with or
then <ENTER>
<EXIT> to return.
H SIZE
70
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
SIZE
V LINEARITY
BLANKING
Image too
Tall
Image too
Short
Ideal
Image
Hight
Ideal
Image
Hight
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
TOP-BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP KEYSTONE
TOP BOW
BOTTOM KEYSTONE
BOTTOM BOW
SEAGULL CORRECTION
H size too
large
H size too
small
Ideal image width
Start up
To correct the Seagull Correction :
1. Push the cursor key
é
or
ê
to highlight
SEAGULL CORRECTION (menu 1)
2. Press ENTER to activate.
Eliminate the deformation by pushing the cursor key
é
or
ê
until a straight line is obtained (image 1).
menu 1
image 1
Size Adjustment
What can be done ?
To adjust (correct) a little bit the picture size (when the projector is on its correct position) in regard with the installed screen
Start up
1. Push the cursor key
é
or
ê
to highlight Size (menu 1).
2. Press ENTER to activate (menu 2).
1. Push the cursor cursor key
è
or
ç
until the exact image width is obtained (horizontal size) (image 1).
2. Push the cursor key
é
or
ê
until the exact image height is obtained (vertical size) (image 2).
Note :
- If the internal # pattern was selected, this pattern remains on the screen.
- If the genlocked pattern was selected, the external source will be displayed.
A bar scale and a numeric indicator help to gauge the size adjustment.
Hint
In order to avoid loss of resolution in the projected image and to ensure maximum CRT longevity, do not use an excessively small
horizontal size setting.
menu 1
menu 2
image 1
image 2