![background image](http://html1.mh-extra.com/html/barco/cine-7-r9002380/cine-7-r9002380_owners-manual_473930053.webp)
7-11
5976066 BARCOCINE 7 07022000
Random Access Adjustment Mode
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
SIZE
V LINEARITY
BLANKING
LINE MULTIPLIER
TIME BASE CORRECTION : ON
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Factory Preset
What can be done ?
All settings for the line multiplier can be set to factory preset settings.
What are the factory preset settings ?
The factory preset settings are :
Time base correction : on
Luminace delay : 0
Vertical sync reference : indirect
Clamp gating : off
How to activate ?
1. Push the cursor key
é
or
ê
to select 'Factory Preset' (menu 1).
2. Press ENTER to activate.
menu 1
Geometry Adjustments
What can be done ?
The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other
color images. The following adjustments can be adjusted Left-right (EW) and Top-Bottom Corrections, Blanking, Horizontal Amplitude,
Vertical Amplitude, Vertical Linearity and Horizontal Phase.
Start Up
To start up the geometry corrections, handle as follow :
1. Push the cursor key
é
or
ê
to highlight 'Geometry' (menu 1).
2. Press ENTER to select.
The Geometry menu will be displayed on the screen (menu 2).
Important
The convergence corrections are disabled during geometry corrections. The blanking corrections are only enabled during the
blanking adjustments.
menu 1
menu 2