![background image](http://html1.mh-extra.com/html/barco/cine-7-r9002380/cine-7-r9002380_owners-manual_473930025.webp)
Getting Started
3-5
5976066 BARCOCINE 7 011299
Front of projector
Rear side of projector
RCU
45
0
45
0
45
0
45
0
)
)
)
)
)
$'-
( ;, 7
(17 (5
3$86(
3+$6(
7(;7
6 +$ 53 1
7, 17
& 2/ 25
% 5,*+7 1
& 21 75
75 (%/(
% $/ $1 & (
% $6 6
9 2/
)
)
)
)
)
$ '-
(;,7
( 17 (5
3$86(
3 +$ 6(
7(;7
6+$53 1
7,1 7
&2/25
% 5, *+7 1
& 21 75
75 ( %/ (
%$/$1& (
% $6 6
92/
COMM PORT
(800 peripherals) REMOTE
R
G(S)
B
S
VIDEO
S-VIDEO
R-Y
Y(S)
B-Y
RS232 OUT
RS232 IN
Pointing the RCU directly to the IR Sensors
Point the front of the RCU directly at one of the 2 IR sensors of the projector.
When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line). The
remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote control
unit and the projector's IR sensor.
Hardwired Remote Input
RCU used in a hardwired configuration.
Plug one end of the remote cable in the connector on the bottom of the RCU and the second side in the connector in the rear panel
of the projector labelled '
REMOTE'.
Projector address
Why a projector address ?
As more than one projector can be installed in a room, the separate projectors should be separately addressable with a RCU or a
computer. So each projector has its own address.
Set up an Individual Projector Address
The set up of a projector address can be done via the software.
See 'Change Projector Address' in chapter 'Service mode'.
Every projector requires an individual address between 0 and 255 which is set in the Service mode. Only projectors with addresses
between 0 and 9 can be controlled with the RCU.
How to control the projector or projectors ?
The projector's address may be set to any value between 0 and 255 which can be set in the Service mode.
When the address is set, the projector can be controlled now with:
- the RCU for addresses between 0 and 9.
- the Computer, e.g. IBM PC (or compatible), Apple MAC, etc. for addresses between 0 and 255.
Note : A projector will respond to a RCU set to the common address ('0' or '1') regardless of what address is set in the projector itself.