![background image](http://html1.mh-extra.com/html/barco/cine-7-r9002380/cine-7-r9002380_owners-manual_473930016.webp)
Connections
2-4
5976066 BARCOCINE 7 011299
Connecting a RGB Analog source with composite sync.
RGB analog input terminals with composite sync input or with sync on green. The projector detects automatically where the sync signal
is located.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
Always use an interface when a computer and local monitor have to be connected to the projector.
BARCO's Interface units.
Universal analog interface
R9826100
RGB 120 MHz Analog Interface
R9826570 (230V)
Multifunctional Analog Interface Kit
R9828120 (230V)
(MAGIK)
R9828129 (120V)
VGA interface
R9828070 (230V)
R9828079 (120V)
MAC interface
R9828050 (230V)
R9828059 (120V)
Input Priority setting
Depending on the priority setting in the 'Picture Tuning menu', Video or S-Video can be displayed.
If the setting is not correct, handle as follow :
1
Press ADJUST key to start up the adjustment mode. The main menu will be displayed (menu 1).
2
Select 'Service Menus'.
3
Press ENTER to select.
A warning menu, 'risk of incorrect adjustment', will be displayed (menu 2).
4
Press ENTER to continue if you are qualified, or EXIT if not.
When ENTER is pressed, the 'Adjustment main menu' will be displayed (menu 3).
5
Select 'Random Access'.
6
Press ENTER to select.
The 'Choose a setup pattern menu' will be displayed (menu 4).
7
Select 'Selected source'.
8
Press ENTER to display the 'Random Access' menu (menu 5).
9
Select 'Picture Tuning'.
10 Press ENTER to display the picture tuning menu (menu 6).
11 Select 'Port2 : Video'.
12 Press ENTER to toggle between VIDEO or S-VIDEO.
13 Press ADJUST to return to operational mode.
menu 3
menu 1
menu 4
menu 5
menu 2
menu 6
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Source 01
WARNING
Risk of incorrect
adjustment of the projector
The following
SERVICE menus
are reserved to,
and to be performed only
by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
MAIN MENU
Image Control
IRIS Control
Sound Control
Function keys
Service Menus
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
é
or
ê
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
PORT2 :
VIDEO
LINE DOUBLER : ON