![background image](http://html1.mh-extra.com/html/barco/cine-5/cine-5_owners-manual_473925009.webp)
Locations and Functions of Controls
R5976101 BARCO CINE 5 ___________________________________________________________________________________
2-1
2
REAR PANEL TERMINOLOGY
1. Communication port
(800 peripherals)
- allows communication between the RCVDS switcher and the projector.
- allows connection of a remote IR receiver unit to the projector.
2. IR Remote -
Remote input for wired remote control
3. IR sensor
- Receiver for control signals transmitted from the RCU.
4. RGB-S IN or (R-Y)Y(B-Y)-S IN ( 5 x BNC connector )
:
RGB-S in
: allows a character generator, microcomputer, video camera, etc. having analog RGB output to be connected to
the projector.
Line inputs :
- signals RED-GREEN-BLUE
- COMPOSITE sync. signal or Hor. sync
- Vertical sync
5. VIDEO IN ( Composite video, 1 x BNC)
connector
allows a video tape recorder, video camera, color receiver/monitor,
etc. having video line output to be connected to the projector.
6. S-VIDEO IN
: Separated Y/C (luma-chroma) signal inputs and outputs for higher quality playback of Super VHS signals.
(4-
pin S-VIDEO connector).
7. Auto diagnosis display
STD BY / NORMAL
PAUSE
COINCIDENCE
EHT HOLD DOWN
IR CODE RXD
8. Local key Pad
9. Power (Mains) Switch
: Depending on the software set-up of the projector during installation, the projector switches to
'standby' or to 'operational mode'. If in standby, the standby led in the auto diagnosis display lights up.
10. Power (Mains) input
: Connect the supplied ac power (mains) cord here and to the wall outlet.
11. Audio Output :
Only if the Tuner option is installed. Audio out to be connected to audio amplifier.
12. RF input :
Only if the Tuner option is installed. Input for RF signals from a TV cable network or TV antenna.
13. RS 232 :
Allows connection to the serial port of a Computer for controlling the projector.
Front Panel Terminology
1. IR SENSOR :
Receiver for control signals transmitted from the RCU.
LOCATION AND FUNCTION OF CONTROLS
1
1
2
3
4
5
6
7 8
9
10
11
12
13