![background image](http://html1.mh-extra.com/html/barco/cine-5/cine-5_owners-manual_473925040.webp)
Service Mode
R5976101 BARCO CINE 5 ___________________________________________________________________________________
7-5
SERVICE MODE
COMMON SETTINGS
I2C DIAGNOSTICS
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SETUP
MEMORY MANAGEMENT
MEMORY MANAGEMENT
or
<EXIT> to return
then <ENTER>
Select with
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
CHANGE PROJECTOR ADDRESS
POWERUP MODE :
COMMON ADDRESS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE BAUD RATE
Standby
Power up Mode
When switched on from the Power switch, the projector can start up in 'Operating mode' or 'Stand-by mode'.
Operating mode
: The projector starts up and displays the image.
Standby mode
: The projector starts up in Standby and waits until the Standby key or a digit key is pressed.
To change the powerup mode, select
Power up
using the arrow keys and then press
ENTER
to toggle between
Operating
an d
Standby
.
EXIT
returns to
SERVICE
menu.
Memory Management
Highlight
MEMORY MANAGEMENT
using the arrow keys then press
ENTER
to display the
MEMORY MANAGEMENT
menu.
Within the memory management menu, the following items can be executed :
- copy a block
- delete a block
- delete all blocks
- all settings to mid position
- R & B convergence to mid