Barco Cine 5, Руководство пользователя

Страница: 39 / 51

Service Mode
7 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
CHANGE BAUD RATE
POWERUP MODE : Standby
COMMON ADDRESS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
CHANGE PROJECTOR ADDRESS
POWERUP MODE : Standby
COMMON ADDRESS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE BAUD RATE
PROJECTOR ADDRESS
ENTER THE PROJECTOR
ADDRESS
0 0 0 0
and
<EXIT> to return
<ENTER> to confirm
Use
to select
and reprogram
with numeric keys
Highest address is 255
Change Projector Address
Every projector requires an individual address between 0 and 255.
This address can be software installed.
To change the address, use the arrow keys to highlight CHANGE PROJECTOR ADDRESS and then press ENTER .
The Change Projector Address menu will be displayed and the actual current address will be displayed.
The first digit is highlighted. Select the individual digits using the arrow keys. Reprogram with the digit keys on the RCU.
Press ENTER to confirm. Press EXIT to return to the PROJECTOR SETUP menu.
Change Baud Rate
The communication speed between projector and computer has 8 possible speeds. The baud rate can be setup through software.
Highlight CHANGE BAUD RATE using the arrow keys and then press ENTER to display the baud rate selection menu.
The following baud rates are available :
- 9600
- 4800
- 2400
- 1200
- 600
- 300
- 150
- 110
The current baud rate will be highlighted in the menu. To change the baud rate, use the arrow keys to select the desired baud
rate and press ENTER to accept this baud rate.
Pressing EXIT in this menu returns to PROJECTOR SETUP menu.
BAUD RATE
9600 4800
2400 1200
600 300
150 110
or
<EXIT> to return
then <ENTER>
Select with