10
STEP 6 ATTACHING THE OVEN BODY TO THE STAND
— Place the stand upright. With a helper, put the oven body (2) in position on top of the stand,
and make certain that the holes in the legs match the attaching threaded holes in the sides of
the oven body. Fasten the oven to the stand with 4 x M6x10mm screws as shown below.
Your Arrosto Outdoor Gas Pizza Oven is now ready to use.
PLEASE READ THE LIGHTING INSTRUCTIONS CAREFULLY BEFORE USE!
STEP 7 INSERTING PIZZA STONE AND ROAST RACKS
— Locate the pizza stone (6) and the wire support grid (7). This support grid has wires to locate
and hold the pizza stone in the correct position. Place the support grid at the bottom of the
pizza oven, just above the burner. You will see that there are 3 tabs that extend from each
side of the inside of the pizza oven. The wire support grid rests on these.
Place the pizza stone (6) onto the wire support grid. The pizza stone should sit on the wire
support grid close to the front of the pizza oven.
— Place the wire roast racks (5) onto the support shelves inside the pizza oven above the pizza
stone as shown below.
ARROSTO GAS PIZZA OVEN-Manual_v5.indd 10
19/12/17 1:28 pm
