barbas Gas Fire Front 70-60 PF2, Руководство по установке и обслуживанию

Страница: 52 / 84

5. Remove the grate.
A
B
Figure 39. Position of air intake and primary air inlet openings
6. Clean the combustion air intake
a) Clean the combustion air intake (A) at the bottom sides of the appliance.
b) Clean the primary combustion air inlet openings (B) of the main burners.
7. Clean the ambient light bulbs. Refer to chapter 6.2.8 .
8. Clean the convection air route.
9. Do a check for damage on the inside of the appliance, including these parts:
a) Main burners.
b) Pilot burner.
c)
Combustion air intake.
d) Overpressure hatches.
e) Flue system. Use a flashlight if necessary.
10. Clean the glass. For standard glass, refer to chapter 6.2.6 . For anti-reflective glass
refer to chapter 6.2.7 .
11. If the black mirror rear wall is installed in the appliance, clean the black mirror. Use
glass spray or ceramic hob cleaner.
12. Install the glass pane. Refer to chapter 6.2 .
13. Prepare the appliance for use. Refer to chapter 5.3.4 .
Maintenance
52 Gas Fire Front 70-60